Advertisement
5. Reviewing your program
Press Review then press Yes first ON with Triangle under Mo will show repeat pressing Yes until all times have been
reviewed for Mo triangle will then move to Tue and repeat then Wed etc when you have finished reviewing stop
pressing YES and RWB will go back to normal mode after 4 seconds of no buttons being pressed
6. Setting the Time
The RWB 1007 comes pre set with correct Date Time should you need to re set the time for any reason Move
programming slider to Clock symbol
Y will appear in the display Press +or – button to change Year when correct Year is in the display Press YES
M will appear in the display Press +or – button to change Month when correct Month is in the display Press YES
D will appear in the display Press +or – button to change Day when correct Day is in the display Press YES
Clock symbol will appear in display Press +or – button to change time when correct time is in the display Press YES
Then move slider to Run
*In some instances the RWB may have been set with the service interval function enabled this option is designed to
remind the end user to contact the relevant person to have the annual service carried out on the boiler
By Law, your gas boiler should be inspected/serviced annually to ensure it is working correctly, to help make sure this
service is carried out at the correct time the RWB can have the Service Interval function enabled. This function will be
enabled and programmed by your Installer, maintenance Engineer, or. Landlord
If it has been set to do so, the RWB will display a message on the screen to remind you that a boiler service is due. This
pre warning countdown will be indicated up to 50 days before the Service is due to allow time to arrange for an
engineer normal functions will continue during this stage .
The amount of Pre warn Days will have been entered by your Installer, maintenance Engineer, or. Landlord you
should contact them on first seeing the Pre-warn. At this point the display will switch between normal display
and the amount of days left. the RWB will also emit a 5 second sound hourly between 9am and 9pm
If the RWB goes past it service day the system will switch of with only the One hour boost functioning and the display
will alternate between the real time and Off
Reset must be pressed after any change to either the (P) Fully pumped -(G) Gravity or the 2/3 Prg per day switch
on back of RWB, Sliders on the front must be in Off when changing from (P) Fully pumped to (G) Gravity
WHAT IS A PROGRAMMER?
...an Explanation for Householders (as recommended by the Energy Savings Trust)
Programmers allow you to set 'On' and 'Off' time periods. Some models switch the central heating
and domestic hot water on and off at the same time, while others allow the domestic hot water
and heating to come on and go off at different times. Set the 'On' and 'Off' time periods to suit
your own lifestyle. On some programmers you must also set whether you want the heating and hot
water to run continuously, run under the chosen 'On' and 'Off' heating periods, or be permanently
off. The time on the programmer must be correct. Some types have to be adjusted in spring and
autumn at the changes between Greenwich Mean Time and British Summer Time. You may be
able to temporarily adjust the heating programme, for example, 'Override', 'Advance', or 'Boost'.
These are explained in the manufacturer's instructions. The heating will not work if the room
thermostat has switched the heating off. And, if you have a hot-water cylinder, the water heating
will not work if the cylinder thermostat detects that the hot water has reached the correct
temperature.
Advertisement
