Kenwood KDC-8090R Instruction Manual page 44

Basic Operations of remote control
Tuner features
• 4/¢ buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• AM/FM buttons
Press the AM button to select the MW and LW bands.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
• DIRECT/OK button
During Preset station seek with programme service name mode,
selects station.
Enters and cancels the Direct access tuning mode.
• DNPP button
Enters and cancels the Preset station seek with programme
service name mode.
• 38 button
Enters and cancels the Programme Type Selection (PTY) mode.
• Number/letter entry buttons
Press buttons #1-6 to recall preset stations.
Use to enter frequency of the desired station during Direct
access tuning mode.
CD/External disc control features
• 4/¢ buttons
Press the 4 button to search through the tracks backwards.
Press the ¢ button to search through the tracks forwards.
Used to move the cursor whilst entering disc name.
• DISC buttons (for disc changers)
–
Press the DISC button to search through the discs backwards.
+
Press the DISC button to search through the discs forwards.
Selects numbers and symbols whilst entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button (for disc changers)
Enters and cancels the Disc Name Preset Play mode.
• Number / letter entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Use to enter letters during disc name preset.
— 44 —