Siemens CCIS1337-LP Configuration Manual page 32

Configuration
32
Siemens Building Technologies
Fire Safety & Security Products
Either manually enter the desired IP address, subnet mask and gateway (if
5.
required), or mark the check box if you want the DHCP server to determine
these parameters.
The settings will be adopted immediately.
This process takes about 40 seconds. Next, the device home page will be
displayed, allowing you to check the entries in Network settings in the
Configuration menu.
Troubleshooting
In some cases the IP Manager may be unable to locate the IP camera.
There is an additional network connection (for example an ISDN modem) on the
PC which is configured, activated and assigned an IP address for the TCP/IP
protocol.
Deactivate the network connection.
The IP Manager can now find the IP camera.
04.2006