Sirius Features; Selecting Sirius Source; Tuning; Channel Preset Memory - Kenwood Ez700SR Instruction Manual

SIRIUS features

SRC
OPEN
AUTO
ST ST
ATT ATT
Band display

Selecting SIRIUS source

Selecting SIRIUS source
Press the [SRC] button.
Select the "SIRIUS" display.
• You need to subscribe to SIRIUS receive the service by
SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-539
SIRIUS TO SUBSCRIBE" appears. Refer to <Activating
your SIRIUS subscription> (page6).
• It may take a little time to start receiving after you
selected the SIRIUS source.
• If you cannot receive any signal in the input Channel
due to a bad condition on radio wave or another
problem, "Acquiring Signal" appears.
Selecting the Preset Band
Press the [FM] button.
Each time the button is pressed the preset band
switches between the SR1, SR2, SR3 and SR4.
20
|
English
AUDIO/ 4/ ¢
FM
SCROLL
c.s.
38
1 - 6
Preset channel number
TI TI DAB NEWS DAB NEWS MP3 WMA MP3 WMA
M P S M P S
DIGITAL ANALOG RDS PTY DIGITAL ANALOG RDS PTY
Channel display

Tuning

Selecting the channel.
Turn the [4] / [¢] knob.

Channel Preset Memory

Putting the channels in the memory.
1
Select the band
Press the [FM] button.
2
Select the channel to put in the memory
Turn the [4] / [¢] knob.
3
Put the channel in the memory
Press the desired [1] - [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the
memory on each [1] - [6] button.

Preset Tuning

Calling up the channels in the memory.
1
Select the band
Press the [FM] button.
2
Call up the channel
Press the desired [1] - [6] button.

Channel Scan

Every receivable Channel is checked for 10

seconds.

1
Start Channel Scan
Press the [AUTO] button for at least 1 second.
The channel number display blinks.
2
Release it when the song you want to listen
to is received
Press the [AUTO] button for at least 1 second.
Switching Seek Mode
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode
switches as shown below.
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset
memory.
Channel Skip/ Lock function
You can Skip and Lock unwanted channels while
tuning and prohibit access particular channels.
Channel Skip:
With hundreds over of Channel available, you
may wish to limit the accessible listed only those
you like.
Channel Lock:
You can LOCK particular channels so that can
be accessed only with Lock Code (4 digit code)
that you define. Channel Lock function useful
for preventing their children access to specific
content.
• You can choose the skip and lock channels with
<Preset Tuning> (page 21) and <Direct Access
Tuning> (page 22).
• Refer to <SIRIUS Channel Skip/ Lock Setting> (page31)
and <SIRIUS Lock Code Setting> (page32).
Listen to Channel Lock content
When you choose the Lock Channels directory
with <Preset Tuning> (page 21) or <Direct Access
Tuning> (page 22). When you choose Lock
Channel, "CODE ----" is appeared on display. You
can listen the channel when input Lock Code (4
digit) is correctly.
1
Select the digits to enter
Press the [AUDIO] knob.
• This function can be used the [FM] / [AM] button.
2
Select the Lock Code numbers
Turn the [4] / [¢] knob.
3
Repeat steps 1 and 2, and complete the Lock
Code.
4
Confirm the Lock Code
Press the [AUDIO] knob for at least 1 second.
"APPROVED" is displayed.
• When the wrong code is entered, this function is
canceled.
|
English
21