RB500 Installation Guide
Preset Configurations (short commands)
At factory the mode Clock&Data is preconfigured.
In programming mode, you can ensure the con-
figuration by using short codes. After selecting the
pre-defined configuration the reader will return to
programming mode.
1. Press "A" and the "3"
Command
A3
The Preconfigured interface is stored in nonvola-
tile memory.
A3 Preconfigured is the interface Clock & Data,
with external control of Red LED, Green LED and
Horn. Also, the yellow LED is not active at all,
showing no indication of noise or key presses.
Function
Preconfigured interface Clock &
Data. Used for 2010.
11