Receiving Broadcast Station; R-Se9T/Dp-Se9/X-Se9 (En - Kenwood DP-SE9 Instruction Manual

26

Receiving broadcast station

It is also possible to receive them by one-touch operations by storing up to 40 stations in the preset
memory.
band
1 1
To decrease
frequency
mode
multi control
\
2 2
Turn the "multi
control" knob
Remote control unit
P.CALL
4
Select a station
Preset call
1. Select the broadcast band.
Each press alternates the band.
1FM
2AM
2. Select a station.
When no stations have been memorized
To increase
frequency
1 Press the "mode" key to select
the TUNING mode.
"TUNING" will appear on the dis-
play for approximately 5 seconds.
2 2
2 While "TUNING" is displayed, select a station with the control knob.
Auto tuning
Manual tuning : Repeatedly turn until a station is tuned in.
When stations have been memorized (preset call)
¢
Every time the key is pressed, the preset stations are switched over as
follows.
Press ¢for the order of 1=2=3 ... 38=39=40=1...
Press 4for the order of 40=39=38 ... 3=2=1=40...
Collective presetting of stations (auto preset)
One-by-one presetting (manual preset)
1 1
: Each time the knob is turned, the next
broadcast station will be tuned in.
Hearing sound

R-SE9T/DP-SE9/X-SE9 (En)

2 2
2 2
1
SELECTOR mode
2
TUNING mode
3
BASS mode
4
TREBLE mode