Kenwood DDX418 Instruction Manual page 47

Menu items Selectable setting/item
z Connect
Connection
z Disconnect
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Enter].
Device Name Shows the device name to be shown on the Bluetooth device — "KENWOOD
BT MM-5U2. "
Device Shows the MAC address of the unit.
Address
Phone Shows the phone device name.
Device* 1
Audio Shows the audio device name.
2
Device*
z OFF
Auto
z ON
Connect
Bluetooth Select the speakers used for Bluetooth (both phone use and audio player).
z Front Only
HF/Audio
z All
Initialize Hold [Enter] to initialize all settings you have made for using Bluetooth
mobile phone and Bluetooth audio player.
z OFF
Auto
Response* 1
z ON
z OFF
1
SMS Notify*
z ON
z System
Ring Mode
z Phone
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring
1
Change* tone for received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
z Call Tone
z Message
Tone
* Hands Free Mode
1 Appears only for <
* Bluetooth Mode
2 Appears only for <
:  page 41
:  page 41
: Cancels.
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
: From front speakers only.
: From all speakers.
: The unit does not answer the calls automatically. Answer
the calls manually.
: The unit answers the incoming calls automatically.
: The unit does not inform you of the arrival of a message.
: The unit informs you of the arrival of a message by ringing
and displaying "Receiving Message. "
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This
function may not work depending on the mobile phone.)
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS .
>.
>.
Initial: Underlined
47
English