Panasonic KX-FT63BX Service Manual page 17

1.14.2.1. MAINTENANCE LIST
NO. OPERATION
1 Document Path
2 Rollers
3 Thermal Head
4 Glass
5 Sensors
6 Abnormal, wear and tear or loose parts If the glass is dirty, clean them with a dry soft cloth.
1.14.2.2. MAINTENANCE CYCLE
No. Item
1 Separation Roller
(Ref. No. 10)
2 Separation Roller
(Ref. No. 12)
3 Feed Rollers
(Ref. No. 7)
4 Thermal Head
(Ref. No. 79)
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry
thoroughly.
If the thermal head is dirty, clean the printing surface
with a cloth moistened with denatured alcohol (alcohol
without water), then dry thoroughly.
If the glass is dirty, clean the with a dry soft cloth.
Document sensor (PS1), Read position sensor (SW42),
Recording paper/cover open sensor (SW1),Jam sensor
(SW3)
Cleaning Cycle
Cycle
3 months 7 years*
(100,000 documents)
3 months 7 years*
(100,000 documents)
3 months 7 years*
(100,000 documents)
3 months 7 years*
(100,000 documents)
CHECK
Replacement
See HOW TO REMOVE THE ROLLERS (P.92).
See HOW TO REMOVE THE ROLLERS (P.92).
See HOW TO REMOVE THE ROLLERS (P.92).
See HOW TO REMOVE THE IMAGE SENSOR
(P.94).
17
KX-FT63BX / KX-FT63BX-W
REMARKS
—
See MAINTENANCE (P.18)
See MAINTENANCE (P.18) and
DISASSEMBLY INSTRUCTIONS
(P.85).
See MAINTENANCE (P.18)
See SENSOR SECTION (P.72).
and SENSORS AND SWITCHES
(P.119).
—
Procedure