Fiat Barchetta Owner's Handbook Manual page 139

FUEL SUPPLY/IGNITION
Integrated electronic injection and ig-
nition system: a single electronic con-
trol unit controls both functions. It
processes both the time the injection
lasts (for fuel metering) and the igni-
tion's advance angle.
Type: Sequential in phase Multipoint
Air cleaner: dry-type with paper fil-
ter element; thermostatically con-
trolled intake.
Petrol pump: in-tank.
Injection pressure: 3 bar
Method of measuring the amount of
aspirated air by directly measuring the
maximum rate of flow with a hot wire
air flow meter.
"Closed loop" petrol metering (in-
formation about combustion provid-
ed by the Lambda sensor).
138
Firing order: 1-3-4-2
Spark plugs:
– Champion RC10YCC
– NGK BKR6EZ
WARNING
Modifications or repairs to
the fuel feed system that
are not carried out properly or do
not take the system's technical
specifications into account can
cause malfunctions with the risk of
fire.
LUBRICATION
Forced-fed with gear pump with
pressure relief valve incorporated.
Oil purification by means of full-flow-
cartridge filter.
COOLING
Cooling system with radiator, cen-
trifugal pump and expansion tank.
"Controlled" by-pass type thermo-
stat on the secondary circuit for the
recirculation of water from the engine
to the radiator.
Electric fan for radiator cooling with
thermostatically-controlled
switch on the radiator.
on/off