Sharper Image SC050 Battle Beasts Instructions Manual page 11

Macro Mode
Press M2 and the desired direction button for more than 5 seconds.
The Beast finishes the corresponding attack route.
Because the Beast's motor will be influenced by ground surface,
electric current and voltage, etc., there may be a slight inaccuracy
in the routes.
Macro mode 1 and Macro mode 2 cannot respond at the same
time. If they are pressed simultaneously, the Beast responds only
to the first button pressed. When the Macro mode button is
pressed, the artillery fire is automatic and the Beast responds to
the CANNON and RIFLE buttons until the Macro mode button
is released. However, in this mode, the Beast can respond to the
HORN button. Mode 1 (M1) is Attacking mode; Mode 2 (M2) is
Defending mode.
11