Sony BRAVIA KDL-50W670A Operating Instructions Manual page 33

x Preparing for the installation of the TV
1
Remove the screws from the rear of the TV.
Be sure to store the removed screws in a
safe place, keeping them away from
children.
Soft cloth
~
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• Be sure to keep the removed screws and
Table-Top Stand in a safe place.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.
2
Attach the Bracket using the supplied
screws. Attach the Spacers to the holes
indicated by the triangle marks
Screw
(+PSW 6 x 12)
Bracket
Soft cloth
x Installing the TV on the wall
1
Install the TV on the wall. Then, confirm the
Stand Protector is firmly latched into the
Wall-Mount Base.
Wall-Mount
Base
~
• Make sure to connect and bundle the cables
before installing the TV on the wall.
2
Attach the Bracket Cap Plate using the
supplied screw.
.
Spacer
2
×
Screw
(+PSW 4 x 10)
Bracket
Cap Plate
(Continued) 33
GB