NEC DT20 User Manual page 38

5
Main Unit Operation
ZOOM
Remote Control Operation
ZOOM
6
Main Unit Operation
SCROLL
Remote Control Operation
POINTER/
SET
7
Main Unit Operation
RESIZE
Remote Control Operation
RESIZE
8
Main Unit Operation
SET
POINTER
Remote Control Operation
POINTER/
SET
NOTE
Adjusting the zoom or the brightness while the pointer is displayed may cause it to disappear momentarily, but it
will reappear after a short time.
Adjust the zoom ratio.
You can adjust the zoom between 1x to 4x.
ZOOM
Pressing the button (or the
controller) reduces the image, and pressing the
the button on the remote controller) enlarges the image.
Move the zooming position.
Press the arrow buttons on the remote controller to move the
zooming position of the image. You can move in eight
directions. (Up, down, left, right and diagonally).
Synchronized Adjustments
Press the RESIZE button to do automatic synchronous
adjustments of each setting to the most suitable status on the
"Sync Adjust" menu (Page E-44).
Display the pointer.
Press the SET/POINTER button to display the pointer. Press
it again to hide the pointer.
Press the SCROLL button to move the pointer.
E-38
button on the remote
ZOOM
button (or