Page 2
Dansk (oversat fra original brugsvejledning) Deutsch (übersetzt von den Originalanweisungen) English (original instructions) Español (traducido de las instrucciones originales) Français (traduction de la notice d’instructions originale) Italiano (tradotto dalle istruzioni originali) Nederlands (vertaald vanuit de originele instructies) Norsk (oversatt fra de originale instruksjonene) Português (traduzido das instruções originais) Suomi (käännetty alkuperäisestä...
E N GL I SH STRAIGHT GRINDER DW882 Congratulations! An estimation of the level of exposure to vibration should also take into account You have chosen a D WALT tool. Years of the times when the tool is switched off...
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed DW882 (grounded) power tools. Unmodified plugs WALT declares that these products described and matching outlets will reduce risk of under “technical data”...
E N GL I SH Remove any adjusting key or wrench working conditions and the work to before turning the power tool on. A be performed. Use of the power tool for wrench or a key left attached to a rotating operations different from those intended part of the power tool may result in personal could result in a hazardous situation.
EN G LIS H p) Do not use accessories that require liquid After inspecting and installing an accessory, coolants. Using water or other liquid coolants position yourself and bystanders away from may result in electrocution or shock. the plane of the rotating accessory and run the power tool at maximum no-load speed FURTHER SAFETY INSTRUCTIONS for one minute.
Guard during operation. INTENDED USE – Risk of personal injury due to prolonged use. Your DW882 straight grinder has been designed for – Risk of dust from hazardous substances. professional grinding applications. Markings on Tool DO NOT use grinding wheel other than specified under technical data.
EN G LIS H Electrical Safety Mounting an Grinding Disc (fi g. 2) The electric motor has been designed for one 1. Slacken the wing nuts (e) and swivel the voltage only. Always check that the power supply bolts (f) to release the cover (g). corresponds to the voltage on the rating plate.
E N GL I SH WARNING: ALWAYS wear working To avoid build-up of metal swarf inside the machine, gloves while operating this tool. we recommend to clear the ventilation slots on a daily basis. See Maintenance. WARNING: The gear case becomes very hot during use.
EN G LIS H Optional Accessories GUARANTEE WARNING: Since accessories, other than those offered by D WALT, have WALT is confident of the quality of its not been tested with this product, use products and offers an outstanding guarantee of such accessories with this tool could for professional users of the product.