Table of Contents
Advertisement
Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting
3D Setup
Auto Setup
Options
On
Off
On
Off
161
Description
Enables passive 3D images
when projecting from 2 projectors
Automatically optimizes image
quality from an analog RGB
computer connection (when On)
Advertisement
Table of Contents
