GE JCKS10 Installation Instructions Manual page 6

Installation Instructions
Cutout for 27"
A
Under Counter
63.5 cm (25")
Top and/or side fillers
may be necessary
if unit is positioned
between existing
cabinets. Be sure
they are attached
securely, since they
will anchor the oven
in the cabinet.
1.9 cm (3/4")
Support Platform
Required
MUST SUPPORT 68 Kg (150 LBS.)
(68.6 cm)
For JCKP30, JCKP70, JCKS10, PCK916, PCK920 models only.
Electric cooktops may be
installed over this oven. See
cooktop installation instructions
for cutout size. See label on top
of oven for approved cooktop
models.
63.5 cm
(25") Min.
64.1 cm
(25 1/4") Max.
70.2 cm
(27 5/8") Min.
71.4 cm
(28 1/8") Max.
Single Built-In Ovens only
240V / 208V
Junction Box
Location (junction
box may be in
adjacent cabinet)
19.7 cm (7 3/4")
Max.
Allow 2.5 cm
(1") overlap
top of oven,
2.5 cm (1")
overlap side
edges of cutout
and 2.5 cm (1")
overlap bottom
of cutout
Must
match
toekick
height
NOTE: This oven is only approved to
be installed under the specific models
as labeled on this unit.
6
Electrical connections for
cooktop must be located in
an adjacent accessible
location to the right.
55.9 cm (22")
91.4 cm (36")
Min. Above
Typical
Support
Countertop
Platform
Height
61 cm (24")
10.2 cm (4")
Typical
Toekick