Honda 2008 Ridgeline Owner's Manual page 92

Hide thumbs Also See for 2008 Ridgeline:
Table of Contents

Advertisement

Door Locks
3.
Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
4.
Release the switch and, within 5
seconds, turn the ignition switch
to the LOCK (0) position.
86
To program the Drive Lock mode:
Locks all doors when the vehicle's speed
reaches about 9 mph (15 km/h).
1.
Make sure the shift lever is in the
Park (P) position.
2.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3.
Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.
4.
Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5.
Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.
6.
Turn the ignition switch to the
LOCK (0) position.

Advertisement

Table of Contents
loading

Table of Contents