Ennn Messages - IBM 4610 - Kxx Service Supplement Manual

Ennn messages

These messages are event messages displayed in conjunction with message
W332.
E030
Explanation: An error occurred in the fiscal unit at power up.
User Response: Run the to determine the cause of the problem.
E032
Explanation: A power line disturbance occurred during command processing.
User Response: Run the to determine the cause of the problem.
E033
Explanation: An error occurred while processing the fiscal command.
User Response: Follow the User Response for the return code in message W332. Refer to the Programming guide
for your printer model your country's specific return codes. (See http://www.ibm.com/solutions/retail/store. Select
support, then select publications.)
E034
Explanation: An error occurred while writing to the fiscal memory.
User Response: Follow the User Response for the return code in message W332. Refer to the Programming guide
for your printer model your country's specific return codes. (See http://www.ibm.com/solutions/retail/store. Select
support, then select publications.)
E036
Explanation: A hardware error occurred in the fiscal unit.
User Response: Follow the User Response for the return code in message W332. Refer to the Programming guide
for your printer model your country's specific return codes. (See http://www.ibm.com/solutions/retail/store. Select
support, then select publications.)
E037
Explanation: An incorrect password was used when trying to access the fiscal unit.
User Response: Re-enter the correct password.
E043
Explanation: The fiscal memory is full.
User Response: The fiscal unit requires service.
E044
Explanation: The J4 (CE) jumper is required to continue.
User Response: The fiscal unit requires service.
20
4610 - K xx Fiscal Printer Service Supplement
(GY27-0366) April 3, 2003