LG 28LB45 series Service Manual page 14

4.6. Model name & SW version & Adjust check
* Press the 'Instart' key of ADJ remote control.
4.6.1. Model Name& SW Version Check
1) Check 'Model Name'.
2) Check 'S/W Version' (Refer to the IC Ver. in the BOM)
4.6.2. Adjust Check
1) Check 'Country Group'
2) Check 'Area Option'
3) Check 'Tool Option' (Refer to the BOM Comments)
4) Check 'EDID[RGB&HDMI]' is OK.
* After check all, Press the 'EXIT' key of ADJ remote control to
go out SVC menu.
4.7. Outgoing condition Configuration
* After all function test., press IN-STOP key by SVC Remote
control. And make Outgoing Condition.
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
- 14 -
LGE Internal Use Only