Section 1 - Product Overview
DC Power Connector
The DC power input connector is
located on the DCS-6410 Network
Camera's back panel and is labeled
12V DC with a single socket to supply
power to the Network Camera.
D-Link DCS-6410 User Manual
Hardware Overview
Reset Button
Reset will be initiated when the reset
button is pressed once and held until
the Power LED flashes through its
cycle twice.
Ethernet Cable Connector (PoE)
The Network Camera's back panel
features an RJ-45 connector for
connections to 10Base-T Ethernet
cabling or 100Base-TX Fast Ethernet
cabling. This network port supports the
NWay protocol, allowing the Network
Camera to automatically detect or
negotiate the transmission speed of
the network.
6