Panasonic PV-D4753S-K Operating Instructions Manual page 27

*Important: If a remote control button does not work when pressed,
Audio Mode for Recording
1
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
(Display disappears after 5 seconds.)
2
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
STEREO
SAP
MONO
• Refer to "Receivable Broadcast Types" on page 26.
• Arrow indicates selection.
3
Make a recording.
See page 21.
Audio Mode for Playback
1 Start playback.
See page 20.
2 Press AUDIO (SAP/Hi-Fi)
to display audio mode.
3
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
H I F I : L / R
H I F I : L
H I F I : R
• Select "HIFI (L/R)" or "HIFI (L)" or "HIFI (R)" to listen to stereo
NORMAL
• Display disappears after 5 seconds.
• Arrow indicates
selection.
Notes
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard
stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
4753S-K(E) P26-35 (030225) RAM.p65
press the VCR button on the remote and try the button again.
recordings in stereo sound.
Select "NORMAL" for monaural sound.
27
27
2003/03/25, 13:21