Components Description - Kenwood KRC-17G Service Manual

Cassette receiver
Hide thumbs Also See for KRC-17G:
Table of Contents

Advertisement

QQ
3 7 63 1515 0
SYNTHESIZER UNIT (X14-687x-xx)
Ref.No.
Application/Function
IC1
SYSTEM µ-COM
IC2
E-VOLUME
IC3
MUTE LOGIC
IC4
POWER AMPLIFIER
IC5
EQUALIZER AMPLIFIER
IC6
RESET
IC7
RDS DECODER
Q49
ACC DETECTION SW
Q50
BACK-UP DETECTION SW
Q51,52 BACK-UP 5V DRIVER
Q53
P.ON 5V SW
Q54,55 8V SW
Q56,57 8V DRIVER
Q58,59 ILLUMI +B SW
Q60,61 ILLUMI +B DRIVER
Q150
E-VOL MUTE SW
Q151
SVR FORCED DISCHARGE SW
Q153
PRE OUT MUTE SW
TE
L 13942296513
Q201
FM +B SW
Q203
AM +B SW
Q260
MOTOR +B SW
Q261
MOTOR +B DRIVER
Q301
CD-CH RESET SW
Q320
PANEL 5V SW
Q350
P.CON DRIVER SW
Q351
P.CON PROTECTION SW
Q352
P.CON PROTECTION INHIBIT SW
Q353
P.CON DRIVER SW
Q450,451 PRE OUT MUTE SW
Q500
AUDIO OUTPUT BUFFER
Q501,502 AFC TIME CONSTANT SW
Q503
NOISE BUFFER
www
.

COMPONENTS DESCRIPTION

Controls the unit.
Controls the volume and selects source.
Controls the mute output.
For the speaker output.
For the cassette tape's signal.
Resets the power.
Decodes the radio data.
Outputs "H" during the ACC off.
Outputs "H" when the back-up voltage is under 9.2V.
Works when back-up current exists.
Works during the power on.
Works during the power on.
Works during the power on.
Works during the power on.
Works during the power on.
Works when the back-up current is detected or the changer mute works
or system µ-com mute works.
Works when the amplifier mute works.
Works when the back-up current is detected or the changer mute works
or system µ-com mute works.
Works during FM mode.
Works during AM mode.
Works during the tape mode.
Works when Q206 works.
Works when the power is reset and the reset SW works.
Works when the back-up current exists and the panel is attached on the unit.
Does not work during the power off and the ALL OFF.
Works when the P.CON is short-circuited on the GND.
Inhibits the protection SW in a moment during the P.CON on.
Does not work during the power off and the ALL OFF.
Works when the back-up current is detected or the changer mute works
or system µ-com mute works.
For RDS decoder.
Works during receiving FM signal.
For noise level detection.
x
ao
u163
y
i
KRC-17G/YA/YG, 194A/G/YA/YG, 266LA/LG/RG
KRC-27YA/YG, 2904YA/YG, 294A/G/YA/YG
2 9
8
Operation/Condition/Compatibility
Q Q
3
6 7
1 3
1 5
co
.
9 4
2 8
0 5
8
2 9
9 4
2 8
m
9 9
9 9
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents