Installation Requirements - Kenmore HE2PLUS 4753 Use & Care Manual

Kenmore washer user manual
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting
the water inlet hoses
Pliers (that open to 19/16" [39.5 mm])
Flashlight (optional)
Tools needed
for installation
Open end wrenches 14 mm and 13 mm
Level
Wood block
Ruler or measuring tape
Parts supplied
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a
15.5" (39.4 cm) pedestal. The pedestal will add to the total height
of the washer.
D
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Transit bolt hole plug (4)
E. Beaded tie strap
Alternate
Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call
1-800-4-MY-HOME
® (1-800-469-4663).
If You Have
You Will Need to Buy
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 96" (2.4 m)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose, Part
Number 8318155; and connector kit, Part
Number 285835
Drain hose too
4 ft (1.2 m) drain hose extension kit, Part
short
Number 285863
Water faucets
2 longer water fill hoses:
beyond reach of fill
6 ft (1.8 m) Part Number 76314
hoses
10 ft (3.0 m) Part Number 350008
Optional pedestal
To order, call your local Sears store. For further information,
please call 1-800-4-MY-HOME
® (1-800-469-4663).
Pedestal Height
Approximate
height
Color
Model
with washer
Number
i
.....................................................................
;i
10" (25.4 cm)
46" (116.8 cm)
White
46822
15.5" (39.4 cm)
51.5" (130.8 cm)
White
57822
Stack Kit
Are you planning to stack your washer and dryer? To do so, you
will need to purchase a Stack Kit.
To order, call your local Sears store. Ask for the stack kit (Part
Number 8572546). For further information, please call
1-800-4-MY-HOME
® (1-800-469-4663).
Follow instructions
included with the kit. See "Location Requirements."
iiii ........

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

He2 plus 110.4751 seriesHe2 plus 110.4753 series

Table of Contents