Configuring Local Voice Mail Service On A Spa400 - Cisco Small Business Pro SPA9000 Administration Manual

Administering the SPA400 and Voice Mail Service
Configuring a SPA400 for Voice Mail Service
SPA400 > Setup > Voicemail Server
STEP 1
STEP 2
STEP 3
SPA9000 Voice System Administration Guide
Downloaded from www.Manualslib.com

Configuring Local Voice Mail Service on a SPA400

You need to configure the voice mail server and set up the voice mail boxes for the
users.
The settings on this page correspond to the settings on the SPA9000 Voice > Line
NOTE
page. See "Configuring a Line Interface for a SPA400 (PSTN or Voice Mail)," on
page 60.
Connect to the SPA400 administration web server. (See
SPA400 Administration Web Server," on
Click Setup tab > Voicemail Server.
Enter the following information:
•
Server Port: 5090
The voice mail server uses this UDP port to listen for signalling between the
SPA400 and the SPA9000. This port must be different from the port number
that you entered on the SPA9000 Interface page.
•
SPA9000 subscriber ID: 8888
The SPA9000 uses the subscriber ID to subscribe to the SPA400 Voice mail
Server for obtaining notification.
manuals search engine
SPA9000 > Voice > Line N
"Connecting to the
page103.)
5
113