Suggested Pile Height Settings; Attachments On Handle; Attachments On Wands - Kenmore 116.27514 Owner's Manual

Forbest deepdowncleaning,usetheXLO
setting,However, youmayneedto raisethe
heightto makesomejobseaster, s uchas
scatterrugsandsomedeeppilecarpets,
andto prevent t he vacuumcleanerfrom
shuttingoff Suggested settingsare:
H1
- Shag, deep pile, or scatter rugs
MED - Medium to deep pile.
LO - Low to medium pile.
XLO - Most carpets and bare floors.
CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON.
This could cause sparking and damage
the electrical contacts.
, i,i i ,, i i
ATTACHMENTS ON HANDLE
NOTE: If the
PowerMate is
attached, turn
vacuum cleaner
off before
removing handle
from wands,
Io Press handle
quick release
button and pull
up on handle
Handle
Quick
Release._
Upper
Wand--
NOTE:
To assemble
dusting brush
insert the fabric
brush into the
dusting brush
nozzle and press
into place.
2. Slide attachments firmly
on handle as needed. See
ATTACHMENT USE
TABLE.
Dusting
Brush
Fabric
Brush
To remove
press latch
and lift out
ATTACHMENTS ON WANDS
l_To
remove
wands from
PowerMate,
lock wands
in straight-
up position,
l
Wand
Quick
Release
Pedal
/
2. Press wand quick
release pedal with foot
and pull the wands
straight up and out of
PowerMate.
The PowerMate plug
and cord do not have
to be removed to use
attachments on the
wands.
3. Put attach-
ments on
wands as need-
ed. See
ATTACHMENT
USE TABLE,
11