Operation - Yamaha TSX-112 Owner's Manual

5
PRESET
6
PRESET
Switching the alarm on/off
Operations during playing back alarm sound
At the set time, alarm sound plays back. During playback, operations below are available.
Note
If source cannot be played back at the alarm time (ex. iPod is not set), beep sound is played back.
Using the snooze function
SNOOZE SLEEP
(As required)
ENTER
ENTER
ALARM
VOLUME
/
USING ALARM FUNCTION
5 Select a track or radio station (as
required).
When the source is CD/USB/FM/AM,
select a track or radio station for
alarm.
y
• To select the last song or radio station you
listened to, select "---".
• When the iPod is set as source, the track
you listened to last time is resumed.
6 Set the alarm volume.
To have the alarm sound at the last
volume level you used, select "---".
Once you have set the alarm volume,
the alarm is set and the alarm indicator
( ) lights up.
y
• While setting the alarm, press RETURN to
return to the previous setting.
• To cancel without setting the alarm, press
ALARM before step 6 is completed.
Switch on/off the alarm function.
y
When the alarm is on, the alarm indicator
( ) lights up and alarm time is displayed
for a while.
Press SNOOZE/SLEEP.
The alarm sound stops and resumes after
5 minutes.
y
• When SRC+BEEP is set, press SNOOZE/
SLEEP to stop the beep sound. press
SNOOZE/SLEEP again to stop the source.
The beep sounds 5 minutes after the source
stopped. The source fades in 1 minute before
the beep sounds.
• When the snooze function is activated, alarm
indicator flashes.
11
En