6.4
Repair Documentation
6.4.1 Description of procedure:
6.4.1.1 Diagnosis
6.4.1.2 Repair by component change
6.4.1.3 Repair by SW-Booting
6.4.1.4 Test
6.4.2 List of needed material
6.4.2.1 Components
6.4.2.2 Jigs and Tools
V1.2
The antennaspring connects the main board with the internal antenna
of the handset.
Visually check the status of the spring. Bent or oxidated springs have
to be replaced.
Use soldering iron to remove defective spring.
Avoid excessive heat!
Watch surrounding components!
Resolder new spring afterwards.
Not possible!
Retest handset after repair.
Antenna Spring C25
Part-Number: L36158-A25-C9
Hot Air Blower
Soldering Iron
Page 19 of 34
Information and Communication Products
Communication Devices
ICP CD ST
D. Schnoor
8/99