NETGEAR powerline 500 XAVB5622 Installation Manual page 6

Factory Reset
button
Ethernet port
Security button
Warning: Do not press the Security button on the Powerline adapter until
installation is complete and the adapters are communicating with each other
(indicated by the blinking Pick A Plug LED). Pressing this button too soon can
temporarily disable Powerline communication. If this occurs, use the Factory
Reset button to return the Powerline adapter to its factory default settings.
Press the Factory Reset button for one second, then release
it to return the Powerline adapter to its factory default
settings.
Connect your computers, networking equipment, and other
equipment that uses an Ethernet cable, to your Powerline
network.
Use the Security button to create a secure Powerline
network.
6