Testing The Audio Transmission - Unitron uTV 2 Manual

Understanding the status lights for uDirect 2
and uTV 2 during streaming
uDirect 2
Streaming solid blue
Streaming short blinks
pause*
uTV 2 not dark
connected*
* If uDirect 2 is also connected to a phone its
audio indicator will:
double-blink during streaming pause
blink if uTV 2 is not connected
24
audio power
uTV 2
solid blue
blinks
green

Testing the audio transmission

The uTV 2 is able to generate a test sound to
check the system.
To start testing:
Switch ON and wear uDirect 2 correctly.
Switch OFF the uTV 2 first, then
press the uTV 2 volume (
and power ( )button
simultaneously until the status
light starts to blink in different colors.
uDirect 2 and the uTV 2 should connect now
(blue/green or blue/orange blinks) and you hear
a sound test melody through your hearing aids.
The test sound continues for 2 minutes or until
any of the uTV 2 buttons are pressed.
Use the uDirect 2 volume (
change the volume of the test sound.
If no test sound can be heard, redo the pairing
procedure as described in step 4.
)
) buttons to
25