Table of Contents
Advertisement
Oven Control Functions
READ TH E iNSTRUCTiONS CAREFU LLY BEFORE USING TH E OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET
COOK TIME
FEATURE
PAD
Used
PAD
Used to
INDICATOR
to set the
enter the length of
LIGHTS
These
time of day..,
the baking time.
light to show
_.
which feature
is
OVEN INTERIOR
_
--_ln
use.
LIGHT PAD
Used to
[urn oven ntenor
ight
_\
-,.
ON or OFF. This _ad is
"_-
also used to acnvate _
_
o
the Cooktou Lockout
"_'_--_
"
feature
some mouelsL
SELECT SELF-CLEAN
®
o
PAD
Used to select
me Self-Cleaning
cycle. A 2. 3 or 4 hour
_-
Self-Clean t_me may be
/
J
selected.
/
/
/
J
TIMER SET/OFF
DELAY START
PAD
Used to set or
PAD
Used to
cancel the minute
set the desired
timer. The minute timer
start time for
does not start or stop
baking & Self-
cooking. Also,
Clean. May be
TIMERSET/OFFpad
used with COOK
is used to set the
TIME to program
Continuous
Bake
a delayed bake
feature,
cycle.
UP and DOWN ARROW PADS--
Used along with the function
pads to
select oven temperature,
cook time,
start time (when programming
an
automatic
start time), time of day,
clean time and minute timer.
o
o
o
o
ADD 1 MINUTE
--
BAKEPAD--
Use to select Add 1
Used to select
Minute feature,
the bake
function.
BROIL PAD--
Used to
select the variable
broil
function.
SLOW COOK PAD--
set the Slow Cook
feature.
WARM & HOLD PAD--
Used to set the Warm &
Hold feature.
RECIPE RECALL PAD--
Used to set the Recipe
Recall feature.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The
"OVEN"
STOP/CLEAR
PAD--
light will glow each time the oven turns on to maintain the set
Used to clear any
oven temperature.
The "PREHEAT"
light will glow when the
function
previously
oven is first set to operate, or if the desired temperature
is reset
entered except the time
higher than the actual oven temperature.
The "DOOR LOCKED"
of day and minute timer.
light will flash when the oven door locks and unlocks or when
Press STOP/CLEAR
to
using the Self-Clean
cycle or the oven door lockout is activated,
stop cooking. Also the
The indicator
light will glow constantly
after the door
STOP/CLEAR
pad is
Iocks.COOKTOP
LOCKED
light will glow when the cooktop has
used to activate
oven
been locked (some models),
door lockout setting.
*Note: The OVEN indi¢ator light On {he electronic display Will
V
once to change back to normal sound mode (:SP will
turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling
appear in the display). The control will now provide normal
to maintain the selected baking tempe[ature.
Whe n the
audible beeps whenever
a pad is pressed.
preheat indicator light turns OFF, your oven is ready.
Temperature
conversion
For a silent
control panel
When
choosing
a function,
a beep
will sound
each
time
a pad
is pressed.
If desired,
the control
can be programmed
for silent
operation.
To switch
back and forth
between
normal
sound
or
silent
operation:
Press
& hold
_.
After 7 seconds,
the control
will beep
once.
:SP should
appear
in the display
indicating
that the control
is in
The electronic oven control is set to operate in °F (Fahrenheit)
when shipped from the factory. The oven can be programmed
for any temperature
from 170°F to 550°F (77°C to 287°C).
To change
the temperature
to °C (Celsius)
or from
°C to °F
(control
should
not be in a Bake or Clean
mode):
1. Press
B,o_ ....
appears
in the display.
normal sound mode. Press either A
or V
once to change
2.
Press and hold the A
until "HI" appears in the display.
to silent
mode
(:- - will appear
in the display).
The silent
mode
will block
the controls
from
sounding
when
a pad is pressed.
3.
To return
to normal
sound
operation,
press
& hold
_.
After
7
4.
5.
seconds :- - will appear in the display. Press either
_
or
Press
and hold
B,o_ until °F or °C appears
in the display.
Press the _
or V
to change °F to °C or °C to °F.
Press any control pad to return to normal operating mode.
.... iiii .......
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When
the range
is first
plugged
in, or when
the power
supply
to
the range
has been
interrupted,
the display
will flash
"12:00".
(/Q')
once
(do not hold
pad down).
1.
Press
2,
Within 5 seconds, press and hold the _
or V
until the
correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake
or Self-Clean cycle.
Advertisement
Table of Contents
