Part 5 Editing Scanning Results - Using 3D Editor
Part 5
Editing Scanning Results -- Using 3D Editor
1. What You Can Do Using 3D Editor
3D Editor lets you do things like the following.
Enlarge and reduce
Move and rotate
Sever
Delete
Merge
Reduce the number
of polygons
Smoothing feature
Export
The features of 3D Editor are described in detail in the "3D Editor User's Manual" (electronic-format manual). Refer to it as well. Note that
3D Editor can only work with surface models.
2. Importing and Exporting Data
Importing Scanning Results Immediately
In Dr. PICZA3, clicking the [Run 3D Editor] button starts 3D Editor and simultaneously imports the displayed scanning results.
Dr. PICZA3
32
Deforming operations such as stretching in one direction are also possible.
Specifying numerical values for the movement distance and angle of rotation is also possible.
You can divide an object into parts. Filling cut surfaces is also possible.
You can delete unneeded objects.
You can unite a number of objects. There is even an alignment feature for doing this.
This reduces the amount of data while keeping detail. This is an essential feature of 3D scanners.
This smooths the surfaces of objects.
Data can be saved in such formats as DXF, STL, IGES, VRML, and Point Group.
[Run 3D Editor] button
3D Editor starts and data
is imported.
3D Editor