Sennheiser BW900 Set-Up And Instructions For Use page 7

Wireless microphone with zoom switch

Hide thumbs Also See for BW900:

(Typical speech/noise pattern for Sennheiser BW900 is shown above)

Using the BW900 Wireless Microphone:

With your PC (for speech recognition and other PC applications):

1. Be sure your microphone is fully charged

2. If using the Zoom Switch, push the blue button on the Zoom Switch as needed to make the LED

red

3. Remove the microphone from the cradle/charger and mount on your ear, placing the end of the

boom about ¾ inch from the side of your mouth

4. Activate the Bluetooth connection by pressing either the base station or headset hook button

marked by (2) and (4) in the diagram below. Upon doing so, a small icon will shine blue on the

base station below the hook button. This signifies communication between the headset and

5. Use the microphone with dragon as you would with any other microphone