Assigning An Ip Address - Vivotek IP8131 Quick Installation Manual

5

Assigning an IP Address

1. Install "Installation Wizard 2" from the Software Utility directory on the software CD.
2. The program will conduct an analysis of your network environment. After your network is
analyzed, please click on the "Next" button to continue the program.
Installation
Wizard 2
3. The program will search for VIVOTEK Video Receivers, Video Servers, and Network
Cameras on the same LAN.
4. After a brief search, the main installer window will pop up. Double-click on the MAC
address that matches the one printed on the camera label or the serial number on the
package box label to open a browser management session with the Network Camera.
IP8130
MAC:0002D132C353
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
5. A browser session with the
Network Camera should
prompt as shown below.
6. You should be able to see live
video from your camera. You
may also install the 32-channel
recording software from the
software CD in a deployment
consisting of multiple cameras.
For its installation details,
please refer to its related docu-
ments.
00-02-D1-32-C3-53
0002D132C353
EN - 5
192.168.5.151 IP8130
2012/11/05 01:50:28