Panasonic KX-TG4011C Operating Instructions Manual page 30

TG401xC(e).book Page 30 Thursday, January 14, 2010 1:29 PM
Useful Information
Call Display
Problem
Caller information is not
displayed.
Caller information is
displayed late.
I cannot dial the phone
number edited in the caller
list.
The 2nd caller's
information is not
displayed during an
outside call. (Visual Call
Waiting feature does not
function.)
30
Cause/solution
L You must subscribe to Call Display service.
Contact your service provider/telephone company
for details.
L If your unit is connected to any additional
telephone equipment such as a Call Display box
or cordless telephone line jack, plug the unit
directly into the wall jack.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L The name display service may not be available in
some areas. Contact your service provider/
telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment and
try again.
L Depending on your service provider/telephone
company, the unit may display the caller's
information at the 2nd ring or later.
L Move closer to the base unit.
L The phone number you dialed might have been
edited incorrectly (for example, the long distance
"1" or the area code is missing). Edit the phone
number with another pattern (page 23).
L In order to use Call Display, Call Waiting, or Visual
Call Waiting, you must first contact your service
provider/telephone company and subscribe to the
desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Call Display and Visual Call
Waiting services.