Snowthrower Installation - Simplicity 1691521 Operator's Manual

Landlord-Snowthrower Installation
A. Hitch Assembly..
B. Rear Support Assembly..
C. Washers (Qty. 2)
D. Hairpin Clip (Qty. 2)
E. Pin
F. Spring Clip (Qty. 4)
G. Clevis Pin, 3/8 (Qty. 2)
H. Rod
I. Reflectors (Qty. 2)
F
G
F
Figure 56. Hitch Assembly..
Part No. 1692040 for Electric Lift

SNOWTHROWER INSTALLATION

1. See Figure 57. Align snowthrower bracket (A) with
front tractor hitch (B).
2. Before attaching the snowthrower bracket to the
hitch, install the belt from the hitch idler pulley (B,
Figure 58) to the snowthrower pulley as shown in
Figure 58.
Do not attempt to install belt on electric clutch pulley
at this time.
3. See Figure 57. Attach snowthrower bracket (A) to
hitch using clevis pins (C) and safety clips (D).
26
C
B
D
Install Pin "E" Through
the Bottom Hole.
E
Attach reflectors (I) to rear lip of
seat deck. If snow cab is installed,
make sure reflectors are not
H
obstructed.
G
CAUTION
After snowthrower installation if the tractor hood is
opened, it will come into contact with the
snowthrower. To protect the hood finish cover the
discharge chute with a towel or blanket.
Figure 57. Landlord/GT/2700/1700 Series
A. Snowthrower Bracket
B. Hitch Arms
26
F
C
D
A
I
C. Clevis Pin
D. Safety Clips