Summary of Contents for Sunbeam SP110
- Page 1 SP110 Skype Phone Adaptor Quick Guide Default Login Detail WAN IP Address: DHCP LAN IP Address: http://10.0.0.1 Password: 1234...
-
Page 2: Package Content
III. Connect the RJ11 telephone line to SP110 FXS port (gray) and phone IV. (option) Connect the RJ11 telephone line to SP110 Line port (green) and wall phone socket. If you don’t need the Landline for incoming and outgoing call, no need to connect. -
Page 4: Step 3 Start Setup
Before configuration, please make sure your Internet Protocol (TCP/IP) properties of PC are as “Obtain an IP address automatically (DHCP)” and “Obtain DNS Server Address automatically.” After PC obtains IP from SP110, use web browser (IE/Firefox) link to URL: http://10.0.0.1. Please select Language as English or Chinese, key in default password: 1234 and click Login button. - Page 5 Step 5 Setup the Skype Account Key in your Skype account and password, then, click the Apply button to save your configuration. Also, you can select the outgoing call priority: Skype First: Always make calls by your Skype account. User can call out by Landline by dialing＃before destination number.
- Page 6 Step 6 Speed Dial Setting (Option) Support 100 lists. Key in Position, Skype Account and Note, then, click the Add button. You can click the “Skype Contact List” to select the Skype account directly. The default setting is with＊99 speed dial key for prompt of Skype Sound Test Service. Ex.
- Page 7 If you select “Landline First,” the default setting, when you dial landline number or mobile number, the call will call out by Landline of SP110 Line port. You can call out by Skype account by dialing＊before landline or mobile number, or dial the Skype speed dial number ＊0 to ＊99 to call the Skype account.
- Page 8 Q & A? Q: Why I use web browser link to http://10.0.0.1, but the log in page of SP110 can’t display? A: Please make sure the hardware installation is correct, please check the status of internet connection, please go to [Start][Control Panel][Network Connection][Local Area Connection], check if the status is connected, if not, please...