Quick Set-Up; Back Focus Adjustment - Bosch Diniop IP - NWC-0455 Installation Manual

EN | 20

Quick set-up

The Dinion IP camera normally provides an optimal picture without the need for
further adjustments. Configuration of the camera is carried out remotely via the
network using a web browser. However, the camera also has an Installer menu in
which basic installation settings (lens wizard, IP address) can be accessed. To
view this menu connect a monitor to the composite video output of the camera.

Back focus adjustment

To optimize picture sharpness in both bright and low-level lighting, adjust the
back focus. Use the camera's unique Lens Wizard. This ensures that the object of
interest always remains in focus even when focusing at the maximum lens
opening.
– When back focusing vari-focus lenses, adjust to obtain a sharp picture in both
wide-angle and tele positions for both far and near focus.
– When back focusing zoom lenses, ensure the object of interest remains in
focus throughout the entire zoom range of the lens.
To adjust back focus:
1. Open the slide door at the side of the camera
2. Unlock the back focus locking button.
3. Turn the back focus adjustment as required.
Dinion IP
| Installation Manual
Bosch Security Systems | 2006-05 | V2.0
3