Adhesive Mounts; Waterproof Case; Waterproof Case Maintenance And Storage - Contour +2 User Manual

Adhesive Mounts

Clean and dry the mounting surface before applying an adhesive mount. We
suggest cleaning the surface with a small amount of alcohol and applying the
mount at room temperature. Let the adhesive cure for 24 hours before use.

Waterproof Case

+ Press firmly to position your camera at the back of the case and close
the Cover Latch to lock tight.
+ Press the Status Button on the back of the case to activate the camera's
Status Button.
+ Start and stop recording with top Record Slider.
+ When using the TRail mounts, engage the TRail Lock on the same side
as the mount for extra security.
Waterproof Case Maintenance & Storage
Inspect the rubber seal for damage prior to each use. Keep the rubber seal
free of dirt and do not use sharp objects to remove the rubber seal. Store
your Waterproof Case unlatched to avoid damage to the rubber seal, and
never store it in direct sunlight. After salt-water use, soak the case in fresh
water for up to an 1 hour.
Contour+2 User Manual
SETTING UP
41