Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Axis P5534 Outdoor T95A00 Kit
Summary of Contents for Axis P5534 Outdoor T95A00 Kit
- Page 1 INSTALLATION GUIDE AXIS P5534 Outdoor T95A00 Kit AXIS P5534 Outdoor T95A10 Kit...
- Page 2 • find answers to resolved problems in the FAQ Australia - This electronic device meets the database. Search by product, category, or phrases requirements of the Radio communications • report problems to Axis support by logging in to your (Electromagnetic Compatibility) Standard AS/NZS private support area CISPR22:2002.
- Page 3 This Axis product must be used in compliance with local laws and regulations. Battery replacement This Axis product uses a 3.0V CR2032 Lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up.
-
Page 5: Installation Steps
Follow these instructions to complete the installation of the AXIS P5534 Outdoor T95A Kit. For all other aspects of using the product, please see the User’s Manual for the AXIS P5534 PTZ Dome Network Camera, and the AXIS P5534 Installation Guide, available on the CD included in this package, or from www.axis.com... - Page 6 (1) Desiccant salt bag Tools/ Parts not included Phillips screw driver Adjustable wrench Other required parts Mounting bracket See www.axis.com for available brackets and accessories Power cable Examples: AWG20, 100-240 VAC cable (AXIS T95A00) AWG22, 24 VAC cable (AXIS T95A10)
-
Page 7: Install The Hardware
AXIS P5534 Outdoor T95A Kit Page 7 Install the hardware Prepare for installation Housing Rubber gasket Dome cover Fastening ring Dome screws 1. Remove the fastening ring, dome cover and rubber gasket at the bottom of the housing by loosening the four 10mm M3 dome screws 2. - Page 8 Go to Setup > System Options > Storage > SD Card and click Unmount. For more information, please see the User’s Manual available from the AXIS Network Video Product CD supplied with this product or from the website at www.axis.com 4.
-
Page 9: Install The Mounting Bracket
1. Install the bracket for the AXIS P5534 Outdoor T95A Kit on a wall and make sure that the screws and plugs are appropriate for the wall (wood, metal, concrete, or any other), and suitable for the weight of the housing. - Page 10 • Be very careful not to drop anything into the housing. It may be nearly impossible to remove small items without dissassembling the housing. 1. Position the AXIS P5534 Outdoor T95A Kit against the bracket, making sure to pull the cables (power, Ethernet, and I/O cables if applicable) into the housing, and tighten the two 25mm M5 allen key screws (included with the bracket).
- Page 11 AXIS P5534 Outdoor T95A Kit Page 11 Connect cables for the AXIS T95A00 dome housing 1. Attach the power cable (100-240 VAC) to the housing. 2. Attach the network cable. Do not connect the network cable to a PoE switch.
- Page 12 Page 12 AXIS P5534 Outdoor T95A Kit Connect cables for the AXIS T95A10 dome housing 1. Attach the power cable (24 VAC) to the housing. 2. Attach the network cable. Do not connect the network cable to a PoE switch.
-
Page 13: Complete The Installation
2. Replace the top cover of the housing and tighten the screws using the supplied Allen key. 3. Connect the AXIS T95A housing to the power supply (110-240 VAC or 24 VAC - depending on the version you are using). - Page 14 Page 14 AXIS P5534 Outdoor T95A Kit Technical Specifications for the AXIS T95A Dome Housing Note: Technical specifications for AXIS P5534 are available in the AXIS P5534 User’s Manual. General Built in die-cast aluminium RAL9002 color Epoxypolyester powder paint Lower dome in polycarbonate...
- Page 15 AXIS P5534 Outdoor T95A Kit Page 15 Environment Indoor / Outdoor Operating temperature: -30° C to +50° C (-22° F to +122° F) Compliance • CE according to EN61000-6-3, EN 60950, EN50130-4 • IP66 according to EN 60529 Package Unit weight 6.9 kg / 15.2 lb.
- Page 16 Status indicator LED Restart button Please note that AXIS P5534 is already installed as a part of the AXIS P5534 Outdoor T95A Kit and is not easily accessible. For the SDHC card slot see Prepare for installation, on page 7. For the LED status indicator, see page 17.
- Page 17 Steady for 10 sec. after successful restart Note: For more information on the AXIS P5534 status indicators, please see the User’s Manual available from the AXIS Network Video Product CD supplied with this product or from the website at www.axis.com...
-
Page 18: Assign An Ip Address
If your network does not have a DHCP server the network camera will use 192.168.0.90 as the default IP address. If you would like to assign a static IP address, the recommended method in Windows is either AXIS IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install, use the method that best suits your purpose. - Page 19 AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address. Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the network camera.
-
Page 20: Automatic Discovery
Automatic discovery 1. Check that the camera is connected to the network and that power has been applied. 2. Start AXIS Camera Management. When the network camera appears in the window, right-click the link and select Live View Home Page. -
Page 21: Set The Password
AXIS P5534 Outdoor T95A Kit Page 21 Set the password To gain access to the product, the password for the default administrator user root must be set. This is done in the ‘Configure Root Password’ dialog, which is displayed when the network is accessed for the first time. - Page 22 The Live View page of the network camera is displayed, with links to the Setup tools, which allow you to customize the camera. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this.If required, click the link to install missing decoders.
-
Page 23: Other Methods Of Setting The Ip Address
AVHS service, follow the instructions in the Service Provider’s Installation Guide. For more information and help to find a local AVHS Service Provider, go to www.axis.com/hosting A Camera owner authentication key is supplied with this product. The key is associated with the camera’s unique serial number (S/N) as shown on the top of the label. - Page 24 Page 24 AXIS P5534 Outdoor T95A Kit Set the IP address with ARP/Ping 1. Acquire an IP address on the same network segment your computer is connected to. 2. Locate the serial number (S/N) on the product label on the camera.
-
Page 25: Resetting To The Factory Default Settings
Please refer to the documentation for your router for further instructions. For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup Further information The User’s Manual is available from the Axis Web site at www.axis.com or from the Axis Network Video Product CD supplied with this product. Tip! Visit www.axis.com/techsup to check if there is updated firmware available for your... - Page 28 Ver.1.0 Installation Guide Printed: July 2010 AXIS P5534 Outdoor T95A Kit © Axis Communications AB, 2010 Part No. 39816...