LG 24GM77 Owner's Manual page 15

Wall Mount (a x b) 100 x 100
Stand Screw M4 x 10 mm
Required Screws
4
Wall Mount Plate
RW120
(optional)
Wall Mount (A x B)
y
NoTE
Use the screws specified by VESA stan-
y
dards.
The wall mount kit includes the installation
y
guide and all necessary parts.
The wall mounting bracket is optional. You
y
can obtain optional accessories from your
local dealer.
The length of the screw may differ for each
y
wall mounting bracket. Be sure to use the
proper length.
For more information, please refer to the
y
user manual for the wall mounting bracket.
aSSEMbLING aND PREPaRING
caUTIoN
Unplug the power cord before moving or
y
installing the monitor to avoid electric shock.
Installing the monitor on the ceiling or on a
y
slanted wall may result in the monitor falling
off, which could lead to injury. Use an autho-
rized LG wall mount and contact the local
dealer or qualified personnel.
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
Use the wall mounting bracket and screws
y
that conform to VESA standards. Damage
caused by the use or misuse of inappropri-
ate components will not be covered by the
product warranty.
To prevent injury, this apparatus must be
y
securely attached to the wall in accordance
with the instrallation instructions. (This per-
tains only to Australia and New Zealand.)
When measured from the back of the moni-
y
tor, the length of each installed screw must
be 8 mm or less.
Wall Mount Plate
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Max 8 mm
15
Back of the Monitor