Unpacking The Access Point; Placing The Access Point - Cisco Aironet 600 Series User Manual

Unpacking and Installing the Access Point
This chapter provides the following information:
•
•
•
•
•
•

Unpacking the Access Point

Each Cisco Aironet 600 Series OfficeExtend Access Point package contains the following items:
•
•
•
•
•

Placing the Access Point

To ensure the best RF coverage for your access point, place your access point in an area as close to the
wireless clients as possible and practical to do so.
If the Internet source or gateway router is in a remote area, position your access point away from metal
obstructions.
The access point can be placed/mounted in a horizontal position, as the access point has rubber feet on
its bottom panel.
The access point may also be mounted in a vertical position using the supplied cradle or wall mounted
slots.
The distance between the mounting hole slots is 158.75 mm (6.25 in).
Note
OL-29882-03
Unpacking the Access Point, page 1-1
Placing the Access Point, page 1-1
Parts of the Access Point, page 1-3
Installing the Access Point, page 1-4
Resetting the Access Point, page 1-5
Understanding the Access Point LEDs, page 1-5
Cisco Aironet 600 Series OfficeExtend Access Point
Ethernet Cable
Cisco Aironet AP600 Series Power Module (universal power supply)
Quick reference guide
Cisco product registration and Cisco documentation feedback cards
C H A P T E R
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
1
1-1