Messages On The Screen - Panasonic DMP-BDT700 Operating Instructions Manual

Playback
Disc cannot be played.
The disc is dirty. (
The disc is not finalized. (
Still pictures (JPEG) do not play back
normally.
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can't play back BD-Live.
The SD card is write-protected. (
Confirm that this unit is connected to the
broadband Internet. (
Confirm the "BD-Live Internet Access"
settings. ( 32)
Confirm an SD card is inserted into the SD
card slot. ( 16)
Connect this unit to the network by a wired
connection.
Network
I can't connect to the network.
Confirm the network connection and settings.
( 13, 14, 31)
There may be interference that prevents the
unit from detecting your home network. Place
the unit and the wireless router closer to each
other. This unit may be able to detect your
network name ( 15, "SSID").
Check the operating instructions for each
device and connect accordingly.
5)
7)
7)
13)
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz) wireless router may solve
the problem. If you use 802.11n (2.4 GHz or
5 GHz) wireless router, it is necessary to set
the encryption type to "AES".
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the "Wireless Settings" screen (
continuous lighting of at least 4 "Reception"
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the "Easy Network
Setting" ( 14) again.

Messages on the screen

Cannot read. Please check the disc.
You inserted an incompatible disc.
Cannot play this title.
You tried to play a non-compatible image.
No disc inserted.
The disc may be upside down.
$ This operation cannot be performed now.
Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
The "IP Address" in "IP Address / DNS
Settings" is "---. ---. ---. ---". Set the "IP
Address", "Subnet Mask", and "Gateway
Address". (Select the automatic address
acquisition if necessary.)
The wireless access point currently has a low
network security setting. It is recommended to
change to a higher setting.
Set a stronger network security level referring
to the wireless router operating instructions.
31), the
37
SQT0280