Back Side - Toshiba TECRA A4 User Manual

i.LINK (IEEE
1394) Port
NOTE: When multiple IEEE1394 devices are connected to a PC, the
devices may not correctly be identified. This problem may occur when
®
Windows XP is restarted while the devices are connected or when the
power to the IEEE1394 devices is turned on before the PC is turned on. If
it occurs, disconnect the IEEE1394 cables and then reconnect them.

Back side

Figure 2-4 shows the computer's back side.
M
ODEM JACK
V -
LAN
IDEO OUT
JACK
Video-out jack
Modem jack
Connect an external device, such as a digital video cam-
era to this port for high-speed data transfer. Some mod-
els are equipped with a i.LINK port. (Provided with
some models)
JACK
Figure 2-4 The computer's back side
Plug a 4-pin S-Video connector into this jack.
In areas where an internal modem is installed as stan-
dard equipment, there is a modem jack that lets you use
a modular cable to connect the modem directly to a tele-
phone line. The modem is not supported in some mar-
keting regions.
Back side
S
ECURITY LOCK SLOT
DC IN 15V
2-5