Pole Mounting - Raymarine GA150a Installation Instructions Manual

5.3 Pole mounting

If you want to pole-mount the antenna, obtain a pole of suitable
length with a 1 inch 14 TPI thread.
1. Ensuring that the Antenna location requirements are met,
securely attach the pole to a suitable, stable point.
2. Screw the pole mount adaptor fully onto the pole and ensure
it is secure on the pole.
3. Route the antenna cable as follows:
i. If you want to route the antenna cable directly down from
the antenna (option A), feed it through the center of the
pole mount adaptor and then down through the pole.
ii. If you want to route the antenna cable out of the side of
the antenna (option B), remove the two plastic tabs from
the cable channel, then feed the cable along the channel.
4. Ensuring you do not trap the cable, place the antenna on the
pole mount adaptor so the screw holes align, then secure the
antenna with the screws provided.
Mounting
A B
D13076-1
21