IRiver H320 Manual page 50

Rockbox manual
Hide thumbs Also See for H320:
Table of Contents

Advertisement

C
6. S
HAPTER
OUND
stereo systems does. The high shelf filter is adjusted the same way as the low
shelf filter, except that it works on the high end of the frequency spectrum rather
than the low end.
As a general guide, EQ band 0 should be used for low frequencies, EQ bands 1 through
3 should be used for mids, and EQ band 4 should be used for highs.
Enable EQ: This option controls whether the EQ is on or off.
Graphical EQ: This option brings up a graphic EQ screen, which allows adjustment of
each of the three parameters described above (gain, center frequency, and Q) for
each of the five EQ bands.
Key
Up
Down
Left
Right
Navi
A-B
Pre-cut: If too much gain is added through the graphical EQ, your music may distort.
The P
setting allows you to adjust the overall gain of the EQ.
RECUT
If your music distorts when using the EQ, trying changing this setting to a nega-
tive value.
Simple EQ: This option provides an easier alternative for those who are daunted by all
of the parameters that can be adjusted using the graphical EQ. With the S
EQ, the only parameter that can be adjusted is the gain.
Advanced EQ: This sub menu provides options for adjusting the same parameters
as the G
RAPHICAL
through textual menus rather than through a graphic interface.
Save EQ Preset: This option saves the current EQ configuration in a .cfg file.
Browse EQ Presets: This menu displays a list of EQ presets, as well as any EQ con-
figurations saved using the S
operation of a parametric EQ may wish to use the presets instead of trying to
configure the EQ, or use the presets for designing their own custom EQ settings.
T
R
HE
OCKBOX MANUAL
S
ETTINGS
Action
Raises the highlighted parameter.
Lowers the highlighted parameter.
Moves to the previous EQ band.
Moves to the next EQ band.
Toggles the cursor among the three pa-
rameters (gain, center frequency, Q) for
the selected EQ band.
Exits the graphic EQ screen.
EQ. The only difference is that the parameters are adjusted
EQ P
AVE
option. Users unfamiliar with the
RESET
50
IMPLE
I
H3
RIVER
XX

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H340

Table of Contents