Verifying The Mobile Thin Client's Operation; Closing The Winping Window; Closing The Dos Window - Wyse X90 Installation Manual

Verifying the Mobile Thin Client's Operation

To verify that the mobile thin client works properly:
1. Reconnect the power cord and power adapter, and then press the power button on the
2. After the mobile thin client restarts, close three windows that have opened on the
Figure 10 Closing the WinPing window
Figure 11 Closing the DOS window
mobile thin client to apply power.
screen by following these instructions:
a. Click Close to close the WinPing window, see Figure 10.
Caution
DO NOT click Ping or this test will fail.
b. Click on the X in the upper right corner of the DOS window, see Figure 11.
7