Sharp GX10 User Manual page 80

Checking the Charge Rate
1.
Select "Read Units", then press
"Setting the Charge Rate" on page 79.
The charge rate is now displayed.
2.
When you have finished, press
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1.
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 79.
2.
Press or to select "Max Cost", then press
.
3.
Press or to select "Set Limit", then press
.
4.
Enter your PIN2 code, then press
5.
Enter a value, then press
To enter a decimal point, press
Checking the Charge Limit
1.
Select "Read Limit", then press
"Setting the Charge Limit".
The value of the charge limit is now displayed.
2.
When you have finished, press
at step 3 in
[Back].
.
.
.
at step 3 in
[Back].
Resetting All Call Timers and Call Costs
1.
Press to display the Main Menu.
2.
Press or to select "Call Manager", then press
.
3.
Press or to select "Call Register", then press
.
4.
Press or to select "Call Timers" or "Call
Costs", then press
5.
Press or to select "Clear Timers" or "Clear
Costs", then press
6.
Press or to select "Yes", then press
To cancel resetting, select "No", then press
7.
Enter your PIN2 code, then press
The Call Timers and Costs are reset to zero.
Checking the Residual Credit
1.
Perform steps 1 to 4 in "Checking the Cost of the
Last Call" on page 79.
2.
Press or to select "Residual Credit", then
press .
3.
When you have finished, press
.
.
.
.
[Back].
Call Manager
.
80