2. Press the wire catches on the retaining clamp (1 in insert illustration above) together and push out (2) to release the bulb and connector from the headlight housing.

3. Pull the bulb out of the connector.

4. Insert a new bulb into the connector.

5. Re-insert the bulb and connector into the headlight housing. The guide lug must be up to ensure proper position.

6. Press the retaining clamp back into position.

7. Reinstall the plastic cover.

Headlight adjustment

The height of the headlight beams can be adjusted according to vehicle load. The headlights should be re-aimed if heavy loads are carried in the trunk/cargo area or rear seat, or when towing a trailer.

To adjust the headlights:

• Park the car on a level surface and open the hood.

• The headlights are equipped with a level which can be seen by looking through the clear "window" on the top of the headlight lens.

• Turn the height adjustment knob until the bubble in the level aligns with the "0" marks or within the dark marking lines.

Lateral headlight adjustment should only be carried out by an authorized Volvo retailer. The lateral adjustment scale (B) should be preset to "0".

High beam headlight bulb (B) replacement

1. Pull the catch on the lower edge of the cover upward and remove the plastic cover.

2. Press the wire catches on the retaining clamp (1 in insert illustration above) together and push out (2) to release the bulb and connector from the headlight housing.

3. Pull the bulb out of the connector.

.../PageContent.asp?PageID=1061&U={A308DBD7-11E2-6E5B-32ED-82405EEBA5B1}&V={CAB0F6D6-415D-C205-E1E4-41F3DD1CF3F0}&T=3&C=230,229,233,239,225,799,825,409,10 12/30/02

A- Low beam Bulbs (high and low beams) - H7 B- High beam

Page 2 of 10