Standard Horizon HX870 Owner's Manual page 82

Adding a Waypoint
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Press the CH▼/CH▲ key to select "WAYPOINT
SETUP", then press the [SELECT] soft key.
4. Select "WAYPOINT DIR." with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Select "ADD" with the CH▼/CH▲ key, then
press the [SELECT] soft key.
6. Select "NAME" with the CH▼/CH▲ key, then
press the [SELECT] soft key.
7. Enter the waypoint name by pressing the
CH▼/CH▲ key and the [SELECT] soft key.
When finished entering the name, press the
[FINISH] soft key.
8. Select "POSITION" with the CH▼/CH▲ key,
press the [SELECT] soft key, then enter the
coordinates.
When finished entering the position, press
the [FINISH] soft key.
9. Select "SAVE" with the CH▼/CH▲ key, then press the [SELECT] soft key
to save the waypoint into memory.
10. Press the CLR key to return to radio operation.
Page 82
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
WAYPOINT SETUP
GPS SETUP
MARK POSITION
ATIS SETUP
WAYPOINT DIR.
ROUTE DIR.
BACK
DISPLAY RANGE
ARRIVAL RANGE
WAYPOINT SETUP
ROUTING OPERATION
BACK SELECT
WAYPOINT DIR.
NAME:
001WPT----------
BACK
POSITION:
-- ° --.---
-
--- ° --.---
-
SAVE
NAME:
STANDARD---------
POSITION:
BACK SELECT
BACK
SETUP
SELECT
WAYPOINT DIR.
ADD
EDIT
DELETE
SELECT
WAYPOINT DIR.
34 ° 25.975
S
118 ° 59.456
W
SAVE
ENTER
HX870