Set Automatic Recording; Set The Date And Time - Panasonic CY-VRP110T1 Operating Instructions Manual

2.5.1 Set Automatic Recording

To enable the recording to start automatically after you turn on the
power, do the following:
1. Press the
OSD menu.
2. Press the
Automatic Record and press the
button.
3. Press the
button.
4. Press the

2.5.2 Set the Date and Time

To set the correct date and time, do the
following:
1. Press the
OSD menu.
2. Press the
button.
3. Press the
button to move to another field.
4. Repeat step 3 until the date and time setting is complete.
Note:
When the battery is drained dry, the user must reset the date/time before the
function-automatic record is started. If the user doesn't reset the date/time, the device will give
you alert (you can see the
will be started, but the video will not have date / time.
button to enter the
/ button to select
/ button to select On and press the
button to exit the menu.
button to enter the
/ button to select Date / Time and press the
/ button to adjust the value and press the
as attached) after one minute and the automatic record
19