Advertisement
This page explains how to connect the unit to a television and set it up so you hear the audio through the television's speakers. To get the full benefit from
the powerful multi-channel audio found on DVDs, you should connect an amplifier and speakers (* page 7).
@Disconnect the AC power supply cord.
@Refer to the television's operating instructions
AUDIO VIDEO
red white yellow
~~~~flsc~ your unit ~~~~ctly to your ~~~~~~~~0~~
Do not connect the unit through your vi&o
cassette recorder when
~..-
setting up your home entertainment system, because lhe picture may
not be played correctly due to the copy guard.
lit consumes a small amount of power, even when it is turned
: approx. 4 W
power when the unit is not to be used for a long time, unplug it
c
These terminals can be used for either interlace or progressive output and provide
a purer picture than the S VIDEO OUT terminal. Connection using these terminals
outputs the color difference signals (PBIPH) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
@The description of the component video input terminals depends on the television
or monitor (e.g. Y/Ps/Pa, Y/B-Y/R-Y, Y/G/G).
Connect to terminals of the same
color.
&After making this connection,
change the black level for a better picture.
(=+ page 21, Video-Black
Level Control)
S video cable
(not included)
.
.I
.*zq----
s VI
~~r~~i~al
The S video terminal achieves a more vrvid picture
than the VIDEO
OUT terminal
by separating
the
chrominance
(C) and luminance (Y) signals. (Actual
results depend on the television.)
#hen making this connection, ensure you connect the audio cables to the corresponding audio input terminals on the television.
___^_~~~~~~)_~__,-~~~~".~~~~~~~-~
Advertisement
